> Paul - or anyone
>
> Does anyone have all of the possible final drive ratios for the Ford,
> Dodge or GM cluster sets that might be used in a PSRU.
>
> Thanks
> Kevin
>
> That is a real good question. All I know for sure is you can
> get 2.17, 3.17, 1.85 and 2.85 out of Ford A4OD prats.
>
>  From the looks of it it is real hard to use the GM parts.
> --
> Paul Lamar ...No rotor no motor.

Kevin,
The GM planetary is 3.2 and 2.2. but then there's the Overdrives for both
the Ford and GM but I don't think their as strong.
I'm looking at the possibility of an aftermarket planetary at 2.8 (1.8)

but

don't know if that will be a cost effective proposition.
George (down under)

Sorry that's the Dodge planetary, getting myself confused!


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.