Scott, I also suggest a 3-rotor. While 300h.p. is possible from a
2-rotor, it would truly take a race quality team to be able to do it
without risk of detonation and overheating. You are now getting into
the area of 3mm seals, cooling passage modifications, sophisticated fuel
delivery and dyno testing. Turbo selection and installation will also
be critical. There is no question that engine longevity will be down.
Rebuilds are relatively cheap and easy, but still a hassle.
Unless you are building a small Reno racer of some sort, stick with the
3-rotor.
--
Dave Leonard
Turbo Rotary RV-6 N4VY
http://members.aol.com/_ht_a/rotaryroster/index.html
<http://members.aol.com/_ht_a/rotaryroster/index.html>
http://members.aol.com/_ht_a/vp4skydoc/index.html
Unfortunately if you are racing in the Sport class at Reno you can't run
a rotary. The sport class rules specifically read "piston engine of 650
c.i. or less."
Bill Jepson
People contacted them about it and they said a 3 rotor was OK.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.