***Snip***
My question for all of you is this: Is it un-reasonable to expect to
get 300 HP out of a turbocharged two rotor engine through 12,000' and
still squeak out 250 HP at FL20 without pushing the engine beyond
reasonable limits? Reasonable to me is in the range of 60% to 80%
power.
I would consider the 2 rotor engine as long as I did not have to "Trick
it out" too far, compromising reliability for ponies.
Bst rgds,
Scott Carroll
Lakeside, Ca.
Scott, I also suggest a 3-rotor. While 300h.p. is possible from a
2-rotor, it would truly take a race quality team to be able to do it
without risk of detonation and overheating. You are now getting into
the area of 3mm seals, cooling passage modifications, sophisticated fuel
delivery and dyno testing. Turbo selection and installation will also
be critical. There is no question that engine longevity will be down.
Rebuilds are relatively cheap and easy, but still a hassle.
Unless you are building a small Reno racer of some sort, stick with the
3-rotor.