Subject: Take off and cruise RPM.
From: Rotary Engine
Date: 2/13/2006, 6:53 AM
To: AA-me



Thanks, Perry. What is your cruise RPM? I run 6000 to 6200 at cruise and
around 5700 at takeoff. Performance Prop 67" dia, unsure of pitch, I
think 68 or 70". Probably only making about 50 HP on one rotor, the
vibration from unbalance seems to soak up a lot of HP. I was descending
about 100-200 FPM at 4300
Chuck

5700 at the start of the take off run Chuck? Static RPM?

Paul Lamar ...No rotor no motor.


I too cruise around 6000-6200. Max at WOT is 6400. When I takeoff it's only around 5200 RPM when I break ground at 80 knots. Climbing out at 100 knots it goes up to around 5400. 62" diameter narrow chord 3-blade and 68" pitch.

Perry

Perry's gear box is a 2.17:1. Numbers are higher with a 2.85:1

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.