OK Mark S
This one is only 2.5 inches high and will fit no problem.
Uses a very common 14 inch diameter filter very similar
to first gen RX7s. Also a lot of early V8. Box is easy
to make out of aluminum or carbon fiber if you want
to get fancy. You will need long screws near or around the center
to keep the top and bottom plates from deflecting due to
ram air and/or engine vac.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.