Dave Leonard wrote:
So, until convinced otherwise, I am more or less committed to
the minimization of cooling drag and the re-use of my
intercooler and oil cooler air for at least some of the water
cooling.
Well, that makes my job (as critic) a lot easier. I'm not going to try
to convince you otherwise. I believe that you have no choice but to duct
the backside of the intercooler & oil cooler to the front side of water
radiator. This will:
1. prevent cooling air that has passed through either
the intercooler or oil cooler from escaping the
cowl without passing through the water cooler, and
2. prevent cooling air from picking up waste heat from
under-cowl heat sources (like the turbo & exhaust
manifold).
To accomplish that duct, you have either a great challenge with the
current arrangement, or you need to move the water radiator. I don't
like either course of action.
Russell Kent
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.