Subject: How to make Carbon fibre tubes water soluble plaster
From: Rotary Engine
Date: 2/14/2006, 7:52 AM
To: AA-me


I want to make the runners that go from the intake plenum to the throttle
body.  This requires a 180 degree sweep. Can anyone tell me how to approach
such a project.  Or recommend a good book on the
subject.     Jerry


Jerry,

My company specializes in unusual geometry for carbon fiber components.
However, we are an aerospace contractor and I can't even afford me.  The
basic principals however are easy to apply to homebuilt projects.

The idea is to create a tool that "disappears" inside a locked shape.  We
use various types of mandrels but the most common technique is to make a
water soluble mandrel.  There really is no limit to the shapes.

Here is a good source for the water soluble plaster.

http://www.acrtucson.com/

Another really cool technique is to make the tooling from Z-corp 3D models
and forget to reinforce the model with infiltrant.  Since, they are bound
with a water soluble material you can wash out the tool in a bucket of
water.   We've made tube junctions and high temperature manifolds using this
technique.   Both these methods can withstand the 14.7PSI force of a vacuum
bag and the rigors of autoclaves.

With the 3D printer create an internal geometry that easily washes out like
a lattice work.  That saves in weight and material.

http://zcorp.com

Good luck!

-Ben

That is a new one on me Ben. I like the idea of water soluble plaster
as you can make a mold and pour the plaster in each time you need a new tool.
In the past we have used carved styrofoam and disolved it out of the
part with acetone.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.