I want to make the runners that go from the intake plenum to the
throttle body. This requires a 180 degree sweep. Can anyone tell me
how to approach such a project. Or recommend a good book on the
subject. Jerry
Jerry,
My company specializes in unusual geometry for carbon fiber components.
However, we are an aerospace contractor and I can't even afford me.
The basic principals however are easy to apply to homebuilt projects.
The idea is to create a tool that "disappears" inside a locked shape.
We use various types of mandrels but the most common technique is to
make a water soluble mandrel. There really is no limit to the shapes.
Here is a good source for the water soluble plaster.
http://www.acrtucson.com/
Another really cool technique is to make the tooling from Z-corp 3D
models and forget to reinforce the model with infiltrant. Since, they
are bound with a water soluble material you can wash out the tool in a
bucket of
water. We've made tube junctions and high temperature manifolds using
this
technique. Both these methods can withstand the 14.7PSI force of a
vacuum
bag and the rigors of autoclaves.
With the 3D printer create an internal geometry that easily washes out
like a lattice work. That saves in weight and material.
http://zcorp.com
Good luck!
-Ben
That is a new one on me Ben. I like the idea of water soluble plaster
as you can make a mold and pour the plaster in each time you need a new
tool.
In the past we have used carved styrofoam and disolved it out of the
part with acetone.
Paul Lamar
About how much is a 5 gallon bucket of Aquacore ? They don't mention this on
their site...
-dave
--
Best Regards /Mit freundlichen Gruessen,
dave ( at ) arb.net
http://arb.net
Aquacore is about $100/5gal bucket as I recall. I think it's corn starch
w/plaster... shhhhh
Hey I could make some of that :)
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.