Subject: How to make Carbon fibre tubes water soluble plaster
From: Rotary Engine
Date: 2/14/2006, 1:45 PM
To: AA-me



I want to make the runners that go from the intake plenum to the throttle body.  This requires a 180 degree sweep. Can anyone tell me how to approach such a project.  Or recommend a good book on the
subject.     Jerry


Jerry,

My company specializes in unusual geometry for carbon fiber components.
However, we are an aerospace contractor and I can't even afford me.  The basic principals however are easy to apply to homebuilt projects.

The idea is to create a tool that "disappears" inside a locked shape.  We use various types of mandrels but the most common technique is to make a water soluble mandrel.  There really is no limit to the shapes.

Here is a good source for the water soluble plaster.

http://www.acrtucson.com/

Another really cool technique is to make the tooling from Z-corp 3D models and forget to reinforce the model with infiltrant.  Since, they are bound with a water soluble material you can wash out the tool in a
bucket of
water.   We've made tube junctions and high temperature manifolds using
this
technique.   Both these methods can withstand the 14.7PSI force of a
vacuum
bag and the rigors of autoclaves.

With the 3D printer create an internal geometry that easily washes out like a lattice work.  That saves in weight and material.

http://zcorp.com

Good luck!

-Ben

That is a new one on me Ben. I like the idea of water soluble plaster as you can make a mold and pour the plaster in each time you need a new
tool.
In the past we have used carved styrofoam and disolved it out of the part with acetone.

Paul Lamar

About how much is a 5 gallon bucket of Aquacore ? They don't mention this on
their site...

-dave
--
Best Regards /Mit freundlichen Gruessen,
    dave ( at ) arb.net http://arb.net



Aquacore is about $100/5gal bucket as I recall.  I think it's corn starch
w/plaster... shhhhh


Hey I could make some of that :)


--
Paul Lamar ...No rotor no motor.

This might be a bad day to trash your wife's kitchen!

Ben


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.