I want to make the runners that go from the intake plenum to the throttle
body. This requires a 180 degree sweep. Can anyone tell me how to approach
such a project. Or recommend a good book on the
subject. Jerry
Jerry,
My company specializes in unusual geometry for carbon fiber components.
However, we are an aerospace contractor and I can't even afford me. The
basic principals however are easy to apply to homebuilt projects.
The idea is to create a tool that "disappears" inside a locked shape. We
use various types of mandrels but the most common technique is to make a
water soluble mandrel. There really is no limit to the shapes.
Here is a good source for the water soluble plaster.
http://www.acrtucson.com/
Another really cool technique is to make the tooling from Z-corp 3D models
and forget to reinforce the model with infiltrant. Since, they are bound
with a water soluble material you can wash out the tool in a bucket of
water. We've made tube junctions and high temperature manifolds using this
technique. Both these methods can withstand the 14.7PSI force of a vacuum
bag and the rigors of autoclaves.
With the 3D printer create an internal geometry that easily washes out like
a lattice work. That saves in weight and material.
http://zcorp.com
Good luck!
-Ben
That is a new one on me Ben. I like the idea of water soluble plaster as you
can make a mold and pour the plaster in each time you need a new tool.
In the past we have used carved styrofoam and disolved it out of the part
with acetone.
Paul Lamar
Paul,
You should've seen the Northrop Grumman quality manager when I pulled a
perfect carbon fiber plenum out of the sink. The biggest problem with "BIG
AEROSPACE" is that they want to catalog all the tooling and cataloging a
tool that went from 3D model to water soluble part was documenting it.
Where's the tool? I told him it was that milk in the sink!
I think there is a potential for someone to formulate a moldable water
soluble material. Something that a ham fist like me can shape into a shape
(play doh?) allow to harden, mold onto and wash away.
The water soluble plaster takes on the same finish as the mold in which it
was created meaning that the INSIDE of the part has a great finish as well.
That's what we want isn't it? I, too have washed out foam but it left a
very rough finish on the inside that's not conducive to good airflow.
Attached are a couple of pictures of a real part done using this technique.
We have applied for a patent on this "technology" but, I'm not real hopeful
given how mundane it is and the prior art out there. I'm not showing the
internal structure of this tool because that's the technology we're
struggling to protect. The tool is about 80% air and can still hold the
forces of the bag. God developed this a long time ago when He designed
chicken bones. Great engineering role model.
-Ben
Paul and friends Just some FYI I talked to Acrtucson the web site that Ben
posted they have a sample pack you can purchase for $30+S&H the woman to
talk to is Halina Pender very nice lady (520) 434 6342. Apparently they
have two types they have a pour type for casting and a more solid type
for machining one is called aquacore and the other is aquapour. Also in
the sample pack is a quarte of both and a filler to make the mold smooth
and a release agent. I have a kit on the way, it'll take about a week to get here.
Tony
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.