I want to make the runners that go from the intake plenum to the
throttle body. This requires a 180 degree sweep. Can anyone tell me
how to approach such a project. Or recommend a good book on the
subject. Jerry
Jerry,
Probably the easiest way is to use carbon fiber sleeves. They are
seamless, sort of like the upper part of the sock, by stretching them
tone can reduce diameter and get tight fit over the mandrel. I used
them many times and they incredibly simlify making tubes. Also, they
make a neat final product. They are occasionally on ebay for good
prices, but I did not see any now.
See for example
http://www.sollerpaddles.com/composites/carbon%20fiber%20sleeves.html
Jerzy
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.