Subject: Max takeoff rpm
From: Rotary Engine
Date: 2/14/2006, 10:00 PM
To: AA-me



Ken,

How is the Dodge gear set looking?  I recently made up a chart listing the
different gear set ratios.  With the 3.2:1 ratio at 6000 rpm, the prop is
swinging at 1875rpm. Compared to  2105 rpm for  2.85:1 gearbox.
Does that play havoc with your props pitch setting? In other words will
they
still maintain their efficiency level at the lower rpms.

The other point I am wondering if most C/S props are designed to be
halfway
efficient at lower speeds under 2000 rpms? Angle is coarse more lift. but
more drag??

Doug in Japan

Doug,
I think 80% of Mach is the target speed for efficiency at cruise.
BTW I also did a work sheet on different gear set ratios - it was an
interesting exercise.
George


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.