Subject: Artical for the web site
From: Rotary Engine
Date: 2/16/2006, 8:22 PM
To: AA-me


Hi Paul,

I think it's just as important to acknowledge the questioner as the
commentator.  Thank you Jerry for a great question!

-Ben


Hi Paul,

Looks good to me.  I'll be excited to see how we, collectively, improve on
our projects as we develop composite components.

-Ben

Thanks for doing this Ben. This has been a real thorn in our side for many
years. Many people have tried to come up with a simple and practical system
for making smooth carbon fiber intake runners and failed. All we need is one
female mold and we can make many water soluble cores.

Here is an opportunity for a composite type guy to make and sell reasonable
priced carbon fiber intake manifolds and plenum.

As an alternative he could just sell cores and let the builder do the labor
intensive layups. If anybody wants some 3D's of such an intake manifold let
me know.

Paul Lamar ...No rotor no motor.

------------------------------

Hi Paul,

I think it's just as important to acknowledge the questioner as the
commentator.  Thank you Jerry for a great question!

-Ben

I have already updated the web site but I can add that no problem.

Here is the first design using your technique. The core box
for casting the soluble plaster is on the right. The soluble plaster
core is on the left. You hand lay up around the plaster core and
you have six bell mouths, six runners, a plenum and a 3 inch throttle
body for an RX8. It is designed to be used with the lower
RX8 stock manifold as in this picture. You tig weld a flange
on top of the stock manifold and layup a carbon flange around
the bottom of the runners to form a mating system.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.