Subject: Daves new radiator
From: Rotary Engine
Date: 2/16/2006, 8:41 AM
To: AA-me

     >
     > BTW, I ordered the new radiator.  No choice but to go with a
    2-row.  I
     > kept the same exterior dimensions to make installation
    easier.  Volume
     > is going from 560 cu.in <http://cu.in> <http://cu.in>. to 900
    cu.in <http://cu.in> <http://cu.in>!
     > (and airflow will go up by 50%).
     >
     > --
     > Dave Leonard
     > Turbo Rotary RV-6 N4VY
     > http://members.aol.com/_ht_a/rotaryroster/index.html
     > < http://members.aol.com/_ht_a/rotaryroster/index.html>
     > http://members.aol.com/_ht_a/vp4skydoc/index.html

    Okay Dave what am I missing here, how does the airflow increase 50% ?

    John

Easy, because I am going to increase the inlet and outlet surface area
by 50%.  :-)


-- 
Dave Leonard
Turbo Rotary RV-6 N4VY
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html

I got bad news Dave. You have also decreased the porosity of your
radiator so less air will flow through it at a given dynamic
pressure difference. What will happen is the pressure will build
up in front of your larger openings and the air molecules will
say "Screw you. I am not going to go into THAT cave. Too much air
pressure in there. I think I will just divert around the out side
of the opening." :) AKA external diffusion. All you are doing
is adding drag. Not only will your rad flow less air but so too
your oil cooler and inter cooler.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.