Subject: Artical for the web site
From: Rotary Engine
Date: 2/17/2006, 8:06 AM
To: AA-me




Hi Paul,

I think it's just as important to acknowledge the questioner as the
commentator.  Thank you Jerry for a great question!

-Ben


Hi Paul,

Looks good to me.  I'll be excited to see how we, collectively, improve on
our projects as we develop composite components.

-Ben

Thanks for doing this Ben. This has been a real thorn in our side for many
years. Many people have tried to come up with a simple and practical system
for making smooth carbon fiber intake runners and failed. All we need is one
female mold and we can make many water soluble cores.

Here is an opportunity for a composite type guy to make and sell reasonable
priced carbon fiber intake manifolds and plenum.

As an alternative he could just sell cores and let the builder do the labor
intensive layups. If anybody wants some 3D's of such an intake manifold let
me know.

Paul Lamar ...No rotor no motor.

------------------------------

Hi Paul,

I think it's just as important to acknowledge the questioner as the
commentator.  Thank you Jerry for a great question!

-Ben

I have already updated the web site but I can add that no problem.

Here is the first design using your technique. The core box for casting the
soluble plaster is on the right. The soluble plaster core is on the left.
You hand lay up around the plaster core and you have six bell mouths, six
runners, a plenum and a 3 inch throttle body for an RX8. It is designed to
be used with the lower
RX8 stock manifold as in this picture. You tig weld a flange on top of the
stock manifold and layup a carbon flange around the bottom of the runners to
form a mating system.

Paul Lamar ...No rotor no motor.


Paul,

One of the beauties of soluble tooling is that it can be fabricated in
separate pieces and glued together to form some pretty wild shapes.   Your
mold which, by the way, doesn't have to be made of exotic materials is great
however, it can be simplified even more.

For example, the tubes can be molded in pvc tubes that you slit, tape and
break open.   We've made many mandrels this way.  If you want curved tubes
that is a little more complex but you can actually do it by replicating bent
tubing with regular plaster of paris.  Somewhere I have a picture of a
fiberglass tool we made off a chrome plated "T".  The interior of the
composite was gleaming.

Now, if you really want to get "out there" we've had professional glass
blowers blow us some amazing shapes which we filled with plaster and
shattered off.  I the world of satellite structures where ounces are
critical this is cost effective.

While on the subject of glass blowers;  Glass makes a great coring material
for aluminum castings.  We have had special one of a kind aluminum castings
cast with glass cores.  Imagine having .250 dia. cooling channels anywhere
you want in a Rotary housing?  Getting the core out is also easy.   They
pour out after the casting cools... Dust.

-Ben



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.