OK Ben how is this? Feel free to edit it or add to
it if you wish. It will go under the category;
http://www.rotaryeng.net/intake.html
---------------------------------------
How to Make Carbon Fiber Intake Manifolds by Marinus B. (Ben) Bosma
The idea is to create a tool that "disappears" inside a locked shape. We
use various types of mandrels but the most common technique is to make a
water soluble mandrel. There really is no limit to the shapes.
Here is a good source for the water soluble plaster.
http://www.acrtucson.com/
Aquacore is about $100/5gal bucket as I recall. I think it's corn starch
w/plaster... shhhhh
Another really cool technique is to make the tooling from Z-corp 3D models
and forget to reinforce the model with infiltrant. Since, they are bound
with a water soluble material you can wash out the tool in a bucket of
water. We've made tube junctions and high temperature manifolds using
this
technique. Both these methods can withstand the 14.7PSI force of a
vacuum
bag and the rigors of autoclaves.
With the 3D printer create an internal geometry that easily washes out
like
a lattice work. That saves in weight and material.
http://zcorp.com
You should've seen the Northrop Grumman quality manager when I pulled a
perfect carbon fiber plenum out of the sink. The biggest problem with
"BIG
AEROSPACE" is that they want to catalog all the tooling and cataloging a
tool that went from 3D model to water soluble part was documenting it.
Where's the tool? I told him it was that milk in the sink!
I think there is a potential for someone to formulate a moldable water
soluble material. Something that a ham fist like me can shape into a
shape
(play doh?) allow to harden, mold onto and wash away.
The water soluble plaster takes on the same finish as the mold in which it
was created meaning that the INSIDE of the part has a great finish as
well.
That's what we want isn't it? I, too have washed out foam but it left a
very rough finish on the inside that's not conducive to good airflow.
Attached are a couple of pictures of a real part done using this
technique.
We have applied for a patent on this "technology" but, I'm not real
hopeful
given how mundane it is and the prior art out there. I'm not showing the
internal structure of this tool because that's the technology we're
struggling to protect. The tool is about 80% air and can still hold the
forces of the bag. God developed this a long time ago when He designed
chicken bones. Great engineering role model.
I don't recommend autoclaving. We autoclave at 300deg
F and pressurize at 125PSI. That's very serious composites that are
structural and highly consolidated. We make microwave components that go
into space and they have to be super light, can't outgas and have to be
strong enough to carry several hundred dollars worth of electronics on a
Delta II ride.
My recommendation is to use a wet lay-up and a simple vacuum bag.
For something like a plenum:
3K twill weave, 3 plys (you don't need to orient them that way).
Huntsman(tm) epoxy resin for infusion (I forget the part number, I'm at
home). Use the Freekote(tm) release on permanent tooling or a sealer on
soluble tooling (polymer of some kind from Lowe's). Prime paint (2-part
epoxy like Polane) over the tool. This is much lighter than gel coat and
gives you a contrasting color on the inside of the part. I recommend
white
because it shows any leaks, drips and other evidence of stuff you don't
want
in your part. The primer becomes the inside layer of your part. Mix up a
small batch of epoxy by weight and stir in some Cab-o-sil (silica) if you
want a little more viscosity. Paint the entire tool over the cured primer
and lay-up the 3K like you were putting on a plaster casting. Strips work
better than big sheets. Lay-up 3 plys the same way and have a Pepsi(tm).
At this point there are tons of options but for the vacuum bag lay-up put
your peelply over every square inch of the part (it will stick), put
breather (baby blanket) over the peel ply and bag over all that.
Suck out the air with your vacuum pump (Seal-a-meal works great) and leave
the pump on for at least 8 hours. The Huntsman(tm) infusion resin
doesn't
gel for 1:50 which is good if you're infusing since you need it to run for
a
long time. Also, it's very thin. Silica is a good thickener but it
makes
it harder to penetrate the fibers. With a 1:50 gel time you can start
over
a dozen times on a part the size of a manifold and still not have a cure
going.
Having said all that, you can use practically any resin/fiber combination
you are comfy with. There are numerous grades of carbon fiber and even
more
glass. If you're going for a high temperature application like an intake
manifold the epoxies tend to work better than the polyesters. We use
epoxy
exclusively because all our parts fly into air or space.
I'm a strong believer in creative composite work. This forum is good for
sharing however, there are as many ways to do something as there are
members
who participate in this forum and the those who lurk here. Try your
system
on a flat piece of nylon cutting board first. Almost nothing sticks to
them. The idea is to get resin to kiss 360degs of each fiber. The 3K
stands for 3,000 fibers per tow which is what you'd normally call a
thread.
3K fabric is pretty light. Getting epoxy to wet out into that is a piece
of
cake. When you look at your wet lay-up with your Pepsi in your hand you
will think it's too dry. When you hookup the vacuum the resin will
squeeze
out into the peelply and fill the breather full of excess resin. You'll
wonder where it came from. The result however is beautiful.
Here is a great link to a guy who, like us homebuilders, is too cheap to
spend thousands of dollars tooling up a one of a kind part.
http://www.jcrocket.com/kitchenbagging.shtml
While, I've got the floor:
I think there are other creative ways to get a shape into a composite.
We've talked about soluble tooling which is fertile ground for you
geniuses
out who still remember Jr. High Chemistry class or home ec. What are some
other materials that will become rigid yet can easily be removed?
Cardboard? Biscuits dough? Play Doh? Ever consider making a rubber
shape,
filling it with sand and sucking the air out of it? Notice how rigid that
assembly is? Ref: coffee bags at the grocery.
What about mixing materials? Nomex veil + Carbon + epoxy? What resins
cure
up and are able to withstand exhaust temps? Is there anything? What
happens when a fully cured composite is torched? Will the carbonaceous
char
still be durable enough for a pipe?
Who says you can't prefabricate a flange and glue it to a soluble tool and
glass around it?
Well, you get the picture...
Autoclaving is not for the weak at heart. We use a lot of pressure and a
lot of heat. Sometimes we even use argon because it has a better heat
coefficient than air and doesn't oxidize parts and tooling under pressure.
Vacuum bagging is sort of a poor middle ground between a wet layup and
that
nasty autoclave.
eBay is an excellent resource for vacuum pumps (food sealers). I
purchased
one a couple of years ago on eBay for less than $20 including shipping and
after cleaning the dried veggies and funk off of it was able to draw
28.5inches of vacuum. That is exactly what we got on our central ($$$$)
vacuum system here.
Do I need to tell you what happened, I mean happens, if you draw resin
into
the kitchen pump? A little resin trap is a good idea. Again, mason jar
(cans collapse, oops I keep showing my mistakes) with a tube in and a tube
out.
Hobby Lobby is another good source for layup materials. The polyester
quilting batting works exactly like the breather material you buy from a
composites supplier because it is exactly the same dang thing!
I'm still looking for a poor man's peel ply. I think there is something
at
the fabric store that works. I just haven't found it yet. The peel ply
we
use is supposedly Teflon(tm) woven into a fabric. It has to breath some
but won't stick to the resin. It looks like lingerie material although,
I'm
NO EXPERT on lingerie (whew!).
The shiny blue tape you see the pros use to seal to the tool is designed
for
high temperatures. Clear packaging tape from the hardware store works
just
as well and is 10% the cost.
We have a room full of bagging films some of which I'll never use again
because they don't work. The best stuff is nylon but it doesn't stretch
so
we use it for flat layups, mostly. For the kitchen layup use laundry
bags,
painting drop cloth.
Now, here's a hot tip. If you want to make a conformal bag, there is a
product out there that works like a charm. It's called liquid latex and
is
also available from Hobby Lobby as Castin' Craft Mold builder. It's
designed to be painted, rolled or poured onto something you need to
replicate. In it's shipped form it's a little heavy but it can be thinned
with a homemade solution of 50/50 ammonia and water. Use distilled water
because if your tap water is a little hard you'll precipitate that out and
it will cause lumps (ask me how I know that.)
-Ben
I have added this to Wankel.org, but what we really need is for someone to
do some experimenting and come up with a home mix replacement for that $100
water soluble plaster. Hmm water, corn starch and plaster. I have them...
Mark
wankel.org
Our web site Mark. Not yours :) Is this a safety issue?
I don't think so :) I think you ought to save your web site
for best practices that concern safety issues. Start with
the Paul Conner crash.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.