Subject: How to make Carbon fibre tubes water soluble plaster
From: Rotary Engine
Date: 2/17/2006, 12:17 PM
To: AA-me




    How were they molded and how were the inserts installed ?
    Kevin

I doubt they'll want to share that info since they do pretty good
business selling them to their fellow enthusiasts.  It all started off
just like you guys are doing; somebody with an idea in their  garage.  As
I said, just showing these to fuel your thought process and end  goal to
shoot for.  The only limit is your imagination, desire, and time. :-)

Here's a few more for an inline 6, this one differs from the previous
one with the CF plenum build around formed trumpets feeding from
the main chamber cavity.  I'm not sure what material the trumpets are
made from.

TeamRX8

I note that the trumpets are oval not round.  Oval trumpets laid down
would save significant room on top of the engine.  Jerry


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.