Subject: How to make Carbon fibre tubes water soluble plaster
From: Rotary Engine
Date: 2/17/2006, 2:31 AM
To: AA-me



     Autoclaving is not for the weak at heart. We use a lot of pressure
and a
     lot of heat. Sometimes we even use argon because it has a better heat
     coefficient than air and doesn't oxidize parts and tooling under
     pressure.

     Vacuum bagging is sort of a poor middle ground between a wet layup
     and that
     nasty autoclave.

     eBay is an excellent resource for vacuum pumps (food sealers). I
     purchased
     one a couple of years ago on eBay for less than $20 including
     shipping and
     after cleaning the dried veggies and funk off of it was able to draw
     28.5inches of vacuum. That is exactly what we got on our central
($$$$)
     vacuum system here.

     Do I need to tell you what happened, I mean happens, if you draw
     resin into
     the kitchen pump? A little resin trap is a good idea. Again, mason
jar
     (cans collapse, oops I keep showing my mistakes) with a tube in and
     a tube
     out.

     Hobby Lobby is another good source for layup materials. The polyester
     quilting batting works exactly like the breather material you buy
from a
     composites supplier because it is exactly the same dang thing!

     I'm still looking for a poor man's peel ply. I think there is
     something at
     the fabric store that works. I just haven't found it yet. The peel
     ply we
     use is supposedly Teflon(tm) woven into a fabric. It has to breath
some
     but won't stick to the resin. It looks like lingerie material
     although, I'm
     NO EXPERT on lingerie (whew!).

     The shiny blue tape you see the pros use to seal to the tool is
     designed for
     high temperatures. Clear packaging tape from the hardware store
     works just
     as well and is 10% the cost.

     We have a room full of bagging films some of which I'll never use
again
     because they don't work. The best stuff is nylon but it doesn't
     stretch so
     we use it for flat layups, mostly. For the kitchen layup use laundry
     bags,
     painting drop cloth.

     Now, here's a hot tip. If you want to make a conformal bag, there is
a
     product out there that works like a charm. It's called liquid latex
     and is
     also available from Hobby Lobby as Castin' Craft Mold builder. It's
     designed to be painted, rolled or poured onto something you need to
     replicate. In it's shipped form it's a little heavy but it can be
     thinned
     with a homemade solution of 50/50 ammonia and water. Use distilled
water
     because if your tap water is a little hard you'll precipitate that
     out and
     it will cause lumps (ask me how I know that.)

     -Ben


Ben,
Dacron works as a peel ply.  Drawback is it doesn't conform to shapes very
well.

Terry Adams




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.