What is the aluminum alloy used to cast the rotor housing?
-dave
--
Best Regards /Mit freundlichen Gruessen,
dave ( at ) arb.net
http://arb.net
I thought sure I answered that.
Yes here it is.
-----------------------------------------------------
-------- Original Message --------
Subject: rotor housing alloy
Date: Thu, 16 Feb 2006 16:47:33 -0800
From: Rotary Engine
<rotaryeng@earthlink.net>
What is the aluminum alloy the housing is made of ?
-dave
--
Best Regards /Mit freundlichen Gruessen,
dave ( at ) arb.net
http://arb.net
I am not sure but I think it is high slicon content to cut
down on the expansion coef. I could be way out to lunch.
I vaguely remember reading about it some where.
OK here it is AC4D Si 5% Cu 1.2% Mg .5%
SAE paper 860560 Material Tech Devel Applied to Rotary Engine
at Mazda.
BTW if you go here
http://www.rotaryeng.net/interesting.html
and then go here
Download PDF formated technical papers on Wankel rotary engines.
you can download a pdf of this SAE paper.
----------------------------------------
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.