Well I can no longer keep quiet on this issue.
:-) I wasn't going to say anything about this
until I was perfectly ready, however due to the
many discussions along this line in the last
little while, I'll just mention it briefly.
I'm in the process of aquiring a large format
Milling machine. It will be used solely to produce
molds and buck's for composite work. I should
have it in and operational by early to mid summer
if all goes well. It will have a very large
footprint [measured in feet.. not inches] and the
ability to machine anything up to MDF, including
high density foam's.
If anyone is wanting a cowl
to fit a specific airframe or style we should be
able to machine you a buck for your cowl in a
short time span and produce a finish from which
you can directly pull either a female mold or a
male formed cowl. We could also make the buck's
for spinners which properly blend into the cowl
for a better, more streamlined look.
If you'd
rather that we do all the composite work for you
this also can be arranged. For those who want any
kind of cowl scoop's [ie; a P51 style, Rad
diffuser's or whatever] this will also be easily
accomplished. It will also be very easy to build
large format molds and buck's. Something like a
complete Cosy upper/lower fuse machined from foam,
would be easily accomplished.
All components will
be machined from 3D CAD model's, so if you can
imagine it... we most likely will be able to build
it for you. Currently we are only planning a 3/4
axis machine, however it is conceivable that we
would add a 5 axis module to the system in the
future, granted there is a need for it. The CAD
modeling could also be done to sketch's provided
by customers [ The same thing Paul currently does]
or to their provided CAD models.
Hopefully this will be something that others can
utilize to produce complex and time consuming
item's. I'll be posting more info as things
progress and we become 'operational'.
All for now
Jarrett Johnson
Jarrett, this is excellent news for me. I'll start saving my pennies :)
Randy
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.