I am planning on making a new cowl after I get the
engine mounted.
I will probably take Terry Adam's advice and move the
prop flange out to 38.5-39 inches for weight and
balance considerations.
I have another cowl like this attachment on my flying
Thorp but it would be too short.

Well if you going to make a new cowl I'll have to move the
engine out. I'll also do a cowl design for you.
That should ease the cooling problem.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.