Subject: Rolls Royce Crecy turbo compound engine
From: Rotary Engine
Date: 2/21/2006, 5:00 AM
To: AA-me


   The Rolls Royce Crecy turbo compound engine
   was a liquid cooled 90 degree V two cycle V12 that weighed 1650 pounds
   and put out 1800 HP at 2750 RPM. No data on the BSFC. 15 psi boost.
   Was never put into production as the jet engine had priority.
   It was a sleeve valve and as such would not have had the problems
   the other turbo compound engines of the times had with exhaust valves
   braking up and taking out the turbine. Just like a rotary :)
    From the Rolls Royce Heritage Trust Sectioned drawings
   of Piston Aero Engines by Lyndon Jones. ISBN 1 872922 07 4
   Gear reduction was 2.2:1. Note the axial flow turbine with the
   stator ahead of it. Rolls probably knew more about that sort
   of thing than anybody else at the time.

   Ops forgot the attachment.
   Here it is.

   Paul Lamar

Ah the Crecy,  One of the hardest engines to get hard data about.  Paul
one of the most interesting things about the Crecy was that it was a 4
cycle sleeve valve at lower RPM and had some mechanism to fix the
sleeves at higher RPM where it became a 2 cycle! I was studying sleeve
valve engines as a possible motorcycle engine when I ran across that bit
of data. Sir Henry Ricardo was the Rolls sleeve valve expert. He
reportedly had sleeve valve supercharged engines producing 2.5 HP per
cubic inch in the late thirties and early forties. I would have loved to
see how the Crecy worked and been a fly on that wall to watch the dyno
runs. As you mentioned the engine was shelved for jet engine projects,
as were most of the large piston engines at the end of WW2.
Bill Jepson

What do you mean by "Crecy was that it was a 4 cycle sleeve valve at lower RPM"?

It was two cycle Bill and only eight were built. Only two were turbo
compound.  The two cycle greatly simplified the driving of the sleeve valve directly
from the crank shaft with an eccentric. No long trains of gears for the
four cycle sleeves like Bristol used. The major problem was the two stroke
principle led to incomplete loop scavenging. That is probably why they did
not mention the BSFC. Not a problem of course for a four stroke rotary.

With all the work done on aircraft engines between 1930 and 1945 it is
amazing the Mazda Wankel superceeded them all in terms of power to weight
ratio and HP per cubic inch. Not only that the rotary engine exceeded
NASA's wildest imagination in 1987 of what the Wankel rotary could do
as some guy (Able Ibarra) in east LA in 1996 got 800 HP out of a
200 pound Mazda two rotor :) The 2004 RX8 engine also exceeds NASA wildest
projections for power to weight ratio. I suspect the reason NASA quit was the
racers in the 1980's where getting way more HP out of the rotary than any of
the high buck "researchers" were getting.

Curtis Wright, John Deere, Lycoming, RPI and NASA spent hundreds of millions
of dollars on stratified charge rotaries and came up with a dead end. There
is no doubt in my mind that some of the fantastic claims of low BSFC s were
out and out lies to pump up the stock value of CW and maybe one or two of
the other companies involved.

Ironically if CW, the father of the most successful turbo compound engine of
all time, R3350 TC, had  identified the turbo compound potential of the
rotary we would be light years ahead now.

Now a couple of us with no money are on the verge of a major break through
in turbo compound rotary engines.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.