Well I keep a Windows computer around for running programs I like
on Windows such as Rhino. If Rhino ever becomes avialble for Linux
I will dump Windoze all together.
Here is one of half a dozen "front ends" for EMC. I like this one
the best so far. 3D tool paths. If you don't like this one there
are five more to choose from.
--
Paul Lamar ...No rotor no motor.
I know what you mean, I'm in the windows boat w/ my SolidWorks also.
That screen-set looks nice, the one feature that I like w/ MACH is that
the
screens are totally customizable. It has a side program called
Screen-designer
so you can create all your own screen set's for whatever your prefer's
mode of
operation is. I think that alot of these NC programs actually have all
the same roots.
It seem's to me that MACH might even be an off-shoot of EMC. I'll have
to look back
and find where I read that... I do know he [ Art the creator of Mach]
started w/ an
open source code and improved it for his own use and then found a market
for it
and has been improving it continually since. I think it just comes down
to
what you like and feel are critical needs and which system fits the
bill! The thing
that swung me towards Mach was the cheap price [ its not free like EMC
but its
only $159], the amazing tech support, free or nearly free upgrades to
the next program level
[ Ie; Mach 2 to Mach 3 is free Mach 3 to IV is supposed to only be $50
or something]
almost daily updates and upgrades to service pack's, excellent
reputation
amoungst user's, and something like 4000 users. Above it all, however
was
the tech support.. Art replies to questions on a hourly basis.. not
days, and you can search the
history for previously asked and answered questions via Yahoo. Also to
simplify the
setup of the system he has about 10-15 video's on his site showing how
to do it all,
and they are each about 10-15 minutes long. It seemed like the right
choice.
I hope to hear how EMC works for you! I'll let you know if Mach cause's
me issue's :-)
Jarrett
OK Jarrett.
--
Paul Lamar ...No rotor no motor.
Hey Jarrett,
Is there a web site for MACH? Will it output in G code?
I built a 3 axis CNC table router some years ago to cut wing ribs and
forms and have been using DesKAM to program it. I am not real impressed
with DesKAM and do not have the budget for the higher end programs. I
have been searching, (on and off) for an inexpensive replacement
program. I too use Solid Works and AutoCAD for my source design files.
Scott Carroll
What problems were you having Scott?
Paul Lamar ...No rotor no motor.
The main problems revolve around the detection of nested islands and the
ability to control the direction of the cut, (CW vs. CCW), and the order
of operation. Also, every once in a while DesKAM will generate a tool
path that will blow through material that is intended as part of the
part on its way to cut a pocket. At first I suspected that it was my
error, but I have always re-checked everything and can never find an
error. I work alone most of the time so there is no one else to double
check me.
I did a quick search for MACH and NC on Google and I did not see
anything relevant in the first few entries. Since I get these emails at
my office, I do not have a lot of time to spend cruising the web to look
things up.
Bst rgds,
Scott Carroll
Could be windows went off and did something else. No telling
what Windows is doing and when it does it as no one has the source code.
That makes it nearly impossible to track down program verses
operating system bugs. Windows has been out 20 years
now and it is still buggy.
Not recommended for NC tools. The FAA won't allow it in certified
avionics for certified airplanes either.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.