There is some engineer lurking on here working for BMW
stealing my ideas :)
This idea was proposed on here in March of 2005.
That is when I first did the 3D.
http://www.rotaryeng.net/combined-cycle-turbo-compound.jpg
Paul Lamar ...No rotor no motor.
Sorry Paul, but that Idea (steam bottoming cycles) has been around for
*decades*. Extensive research was done on it funded by DOE and some by NSF
in the 70's and 80's. Thermo-electron made a bottoming cycle over-the-road
truck as part of the program.
Problem was always
*co$t* and complexity.
Bill Schertz
KIS Cruiser # 4045
http://arjournals.annualreviews.org/doi/abs/10.1146/annurev.eg.07.110182.001453;jsessionid=nzqJfRkUmYY63ZdZCM?cookieSet=1&journalCode=energy
Oh darn :) Maybe when the price of gas hits $10 a gallon.
BTW while I got you on the line what do you think of BMW's idea
to use alcohol to cool the engine and let it vaporize at 173 degrees
Fahrenheit. Doesn't the heat of vaporization require and therefore remove
large amounts of heat? I would imagine the cooling system would have to be
high pressure capable.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.