In my bin of parts with the old 13B engine I bought and did not use, I
found this manifold.  It has an aluminum plate, welded on runners, and
a carbon fiber manifold for a turbo.  I think the guy that built it was
using a Garrett, but I'm not certain.

If anyone can use this, please let me know.  I was going to use the
flange, but I don't need it for my Renesis.

Scott Gettings

Looks like an attempt at a dynamic chamber for low RPM torque.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.