Subject: Hose ends on stainless steel hose
From: Rotary Engine
Date: 2/27/2006, 8:28 PM
To: AA-me



> > Hello,
> > I almost feel kind of silly posting this, compared to the other things posted
> on
> this discussion board, but...
> >   > I’m in the process of putting the hose ends on the stainless steel braid
> hose
> for my oil system.  I’ve sheared off the nipple on the AN fitting on a
> smaller
> hose while trying to screwing the two pieces together and I don’t want to
> make
> the same mistake twice.  Can someone tell the correct way of doing this?
> > Thanks,
> > Burck
[snip]

-----------------------------------------------------------

        Please use a Mandrel when fabricating the items. It will prevent
"skiving"
the center of the hose and causing problems, Virg

----------------------------------------------------------

look here at the mistakes.........

http://www.sacskyranch.com/hosemistakes.htm
and here is a picture of the mandrels:

Kevin


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.