> Hi Paul.
    > I'm looking for 1.85 planetary reduction drive do you know
    > witch gear it is out of the transmission,whether it is the 3rd or
   4th?
    > Could you let me know .
    > Thank you.
    > Henry.
    >
    >
    > It is the current same part as Tracy is using for the 2.85:1. I am
    > not sure
    > of the part number but I can guess it is this number 15 in
    > this page from the Slauson Transmission parts catalog.
    >
    > Slauson Transmission Parts
    > 15407 S. Broadway St.
    > Gardena, California 90248-2207
    > U.S.A.
    > Phone: (800) 421-5580
    > Fax: (310) 768-8298
    > Web: http://www.slauson.com/
    >
    > It won't work as is. You will have to take power out of the
    > ring gear and hold the planet carrier stationary. Consequently
    > there will be some serous machining on these parts.
    >
    > Paul Lamar


   Ya got it backwards, for a 2.85 you take the power from the planet
   and hold the ring gear solid.
   Ken

   --------------------------------

   NO I don't :)

   He does not want 2.85:1. He wants 1.85:1 Ken.

   Calculations for 1.85:1 are trivial and merely C/A


   Paul Lamar ...No rotor no motor.

Hello Gentleman.
You are right I want the 1.85 to 1 re-drive, for the rotary its too low.
I bought the RX7 engine but changed my mind. Now I got the Subaru 2.5.
For this its better to use the 1.85 to 1 other wise the engine would
rev. to high.
The RV 9 is rated for 160 hp and with 1.85 will be just right.
I didn't find those gears yet.
Thank you.
Henry.

Log on to http://www.slauson.com/ and register.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.