Subject: Hose ends on stainless steel hose
From: Rotary Engine
Date: 2/28/2006, 8:44 AM
To: AA-me


>> > > Hello,
>> > > I almost feel kind of silly posting this, compared to the other >> things posted
>> > on
>> > this discussion board, but...
>> > >   > I’m in the process of putting the hose ends on the stainless >> steel braid
>> > hose
>> > for my oil system.  I’ve sheared off the nipple on the AN fitting on a
>> > smaller
>> > hose while trying to screwing the two pieces together and I don’t >> want to
>> > make
>> > the same mistake twice.  Can someone tell the correct way of doing >> this?
>> > > Thanks,
>> > > Burck
>> [snip]

-----------------------------------------------------------
>
>         Please use a Mandrel when fabricating the items. It will prevent
> "skiving"
> the center of the hose and causing problems, Virg

----------------------------------------------------------

look here at the mistakes.........

http://www.sacskyranch.com/hosemistakes.htm
and here is a picture of the mandrels:

Kevin

---------------------------------------------------------
       SKIVE- The rubber flap caused be the nipple cutting into the
hose.
Caused by the use of the wrong or no Mandrel, Virg    Nice web site on
mistakes.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.