snips...
Thanks Gordon,
I would appreciate it you could check the report for spelling or other
mistakes. Doing some hand sketches today I found at least on mine setup
an axial power turbine on the hot side and a super charger feeding a small
intercooler like the Mini Cooper, and wrap over intake manifolds make for a
very compact cowl. Naturally rammed air smiley scoop under the prop feeds
the filter and supercharger on one side, the heater muff around the exhaust
on the other side, and two thin underneath. Oil cooler in the rear support
tube. Motor mount may have to be outside the cowling:)
Paul
The reports looks fine in Word. I save it as a HTML and changed some
wording. Lets try again.
Doug F.
It is a doc file. Here is what the first page screen capture
looks like in Open Office.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.