FYI,
Misc parts for FC
I apologize if this posting offends anyone, but I thought that perhaps
one of you might want this opportunity.
I'd like to find a single buyer for a lot of spare FC stuff I have
around.
It's almost entirely engine and engine bay related stuff, no drivetrain,
body or interior at all. I dont have a
*complete* inventory with
quantities and exact condition, but here's a quick list I compiled to give an idea
of what's on the table. Many of these I have several of...I have about 8-9
engines worth of accessories, manifolds, wiring, injectors, etc. from FC
NA engines.
This is from my website parts FS page, so there are individual prices
for most of it...just ignore that in this context. OF course if you spot
something you want to buy now, that's fine too, let me know.
As for a bulk buy (I really want rid of all of it at once, not just one
part here, one part there) I really dont know what price to ask. There's
really about 2 pallets worth (if you figure a gaylord box on each pallet) of
parts here, or one BIG pickup truck load. I have BINS and BINS of misc little
sensors and such too. To buy out all of what I intend to sell (remember
there are 8-9 engines' worth of manifolds, wiring, etc.) I'd be looking
around $1000 or so. I'd like to either a) have someone come pick it all
up, I will help load, or B) ship a big pallet or 2. I dont want to do lots
of small shipments, which is why I'm looking for a bulk buyer at a cheap
price. A man could easily double his money in his spare time with this deal.
I'm not getting out of business, just trying to clear out some
non-engine-internal parts to make some shop space. It's not like I need
this stuff around, though a lot of people wind up giving or trading it to me
anyway.
I'd also consider partial or full trades for core engines (shortblock
only please, duh) anything 86-95.
Get in contact with me if you are seriously interested. I also have some
FD engine stuff I'll be considering selling off too, so you might be
interested in working that into the deal as well. IF it's necessary I can try to
come up with a more accurate inventory, but honestly there are HUNDREDS of
little parts laying around that make it unrealistic to be exact.
Todd Archer
hypntyz@charter.net
I am located in east TN.
-------------------------------------------------------------
saden a/c compressor $10
-86-88 NA engine rotors 9.4:1 compression, $50 each or $85/pair (many
available, all balance letters)
-86-88 n326/7 nonturbo ecu $30 shipped
-88 n338 'vert ecu $35 shipped
-89-91 nonturbo n350/351 (runs any 89-91 coupe or convertible) $80
shipped
-89-91 turbo and nonturbo electric OMP $100 shipped (tested per FSM
guidelines and/or on a running s5 car)
-set of 86-8 NA 6 port actuators and sleeves $10 shipped
-stock flywheels in useable condition, 89-91 turbo $30
-stock clutch sets with ¾ life or greater left: 84-91 nonturbo $40 plus
shipping
-NA 6 port engine irons $20 each or $50 for 3
-FC stationary gears with useable bearings $10 each or $15 for 2
-FC front covers $10-20 depending on model
-front counterweights $5
-crank pulley hubs and pullies $5
-oil pumps (NA) $10
-crank angle sensors $5
-OMP lines $5 each
-used stock plugwires, good condition. $5/set
-used waterpumps $10 s4 and s5
-NA waterpump housings s4 and s5 $5
-NA thermostat necks s4 $5, s5 $20
-cut off harness plugs various models $5 per plug when available
-turbo plumbing lines inquire
-turbo TB intake elbows $5
-turbo oil filler necks $5
-s4 NA/turbo TPS's $20
-s5 NA tps's $40
-s5 turbo TPS $50
-throttle bodies, s4 NA $10 s5 NA $20
-intake manifolds. S4 NA LIM/UIM/DC $15 for all 3, s5 NA LIM/UIM/DC $50
for all 3
-NA air pumps $5 each
-NA air pump brackets $5 each
-motor mounts $10 each
-NA engine harnesses in used, average, useable condition (some
connectors may need attention) s4 NA $20 s5 NA $30
-NA fuel injectors $10 each
-NA fuel rails s4 NA upper $5, s5 NA lower $10, s5 upper $10
-4 88 high impedance square plug turbo 550cc injectors $85
-4 87 low impedance square plug turbo 550cc injectors $85
-s4 turbo, compressor wheel lightly damaged, would still boost, or use
to rebuild/hybrid. Decent condition, normal shaft play otherwise. $25
-s4 turbo manifold, normal size crack in the normal place, definitely
useable, $25
-s4 cooling fans $5
-complete a/c system removed from 87 GXL (minus dash core), sanden
compressor $20 for all
-NA and turbo cruise actuators $5
-s5 NA afm $30
-s4 turbo metal intercooler pipe between turbo and IC (good replacement
for plastic s5's that break) $5
-s4 turbo LIM $10
-s5 turbo UIM $10
-s4 turbo airpump with brackets $5
-s4 turbo heat shields $5
-s5 NA fuel pump $10
-86-7 fuel injector resistor pack $5
-vacuum racks s4 and s5 NA with hoses and solenoids $5
-s4 turbo lower fuel rail $5
-s4 turbo upper fuel rail $5
-s4 turbo fuel pressure regulator $5
-oil pan gaskets $5
-s4 NA intake manifold gasket sets (block to lower, lower to middle,
middle to dynamic) $15
-waterpump gaskets $5
-waterpump housing to block gaskets $5
-NA ACV gaskets $5
-s4 NA 6 port actuator to LIM gaskets $5/set
-atkins style block to manifold exhaust gaskets $5
-atkins style manifold to precat/pipe oval exhaust gaskets $5
-used t2 turbo downpipe to turbo metal gaskets, good shape $5
-used (like new) oil control rubber orings with metal carrier rings (set
of 8 for complete engine) $15
-front cover to oil cooler hose $5
-NA exhaust manifold $5
-s4 alternators $20
-s5 alternators $35 (can provide plug if converting from s4 or earlier)
-various EGR valves, BAC valves, oil injectors, oil dipsticks, oil
pressure
sending units, oil filter housings, oil pressure regulators, oil caps,
coolant cap housings, engine brackets, misc hardware, oil pan pickups, 6
port sleeves and actuators, oilpans, knock sensors, eshafts, tension
bolts,
AWS valves, solenoids, thermowax's, mechanical OMP's etc. inquire (very
cheap)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.