Subject: turbocharged gasoline-powered BMW verses the turbo compound rotary
From: Rotary Engine
Date: 3/6/2006, 12:41 AM
To: ACRE NL

News: 2007 BMW 335i Coupe to Have 302-HP Turbo Six
The new 2007 BMW 335i coupe has 302 hp and 295 lb-ft of torque and breaks ground as the first
turbocharged gasoline-powered BMW in decades.
BY MIKE DUSHANE
PHOTOGRAPHY BY CHRISTA LEHMANN/HIDDEN IMAGE
March 2006

The BMW 335i coupe that will appear later this year may look like nothing more than the latest
chapter in the 3-series coupe book, but there are some radical changes under the skin. The 335i (the
C goes away on this coupe as it did on the 650i for the 2006 model year) will have a 3.0-liter
twin-turbo inline-six with piezoelectric direct injection. The symmetrical turbos are relatively
small and each feed three cylinders. Power output is up only 47 hp over the normally aspirated
version of the same 3.0-liter six found in the 330i, but BMW claims that turbo lag is all but
avoided and — more importantly — peak torque increases 34 percent and is available from 1500 to 5800
rpm. BMW estimates that the twin-turbo setup gives the 335i's six the power and torque
characteristics of a 4.0-liter V-8 with 10 percent less fuel consumption and 145 fewer pounds. BMW
expects the 335i to shave more than half a second from the 330i's 0-to-60 time, which should put it
in the low-five-second range — scarcely more than the outgoing E46 M3. The 335i is expected to carry
a base price of approximately $42,000 when it goes on sale this summer. The 2008 M3 is expected to
have a 400-hp naturally aspirated V-8 and cost $10,000 more.

Why, you ask, would BMW go to all the trouble of making this complex turbo engine when a V-8 would
be a simpler and purer means to the same end? As worldwide petroleum reserves decline and prices go
up, efficiency becomes paramount, even for performance and luxury vehicles. As worldwide emissions
standards become increasingly strict, high-performance diesels — recently thought to be the next big
thing — become less feasible. Mercedes-Benz also recently announced a piezoelectric direct-injection
gasoline six which is naturally aspirated — for now. Dr. Thomas Weber, Mercedes-Benz's top
engineering and development officer, confirms that turbocharged smaller-displacement engines are in
Mercedes-Benz's near-term future as well. Turbos are here to stay.
--------------------------------------------------------------------

Uploaded by Hans Conser

The reduced automotive mode fuel consumption is a reflection of the fact the core
engine is smaller and better matched to the low average HP requirement of a car.

The ideal automotive engine would be a 50 HP core engine running at optimum BSFC
all of the time during cruise with some sort of device that bumps the power up
to two or three hundred HP during those rare times when rapid acceleration is
required. A turbo charger goes along way towards emulating such a device
as does a hybrid electric motor and a battery. A Toyota hybrid would be an
excellent example if it were not for the increased weight of electric motor
and battery. A turbo charger system will weigh less than 50 pounds
and cost less than an electric hybrid.

The fundamental thing to keep in mind is the BSFC or the efficiency
of the core engine is not being increased here. This approach only takes
advantage of the extremely low duty cycle of the automotive driving mode.
This is known as engine down sizing.

What we are proposing with the turbo compound rotary increases the efficiency
and drastically improves the BSFC of the core engine.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.