This is what it will look like more or less. Slightly under five
inches in diameter and 7.5 inches long over all.

The flange is about in line with the water pump front surface for
and adapter bracket off some water pump studs or bolts. This will
be the main mounting method.

If this works as well as I think it will work it will drop
the rotary BSFC from .47 to .375 at about 14,000 feet. Better
than most diesels. Not bad for an additional ten pounds over
the turbo model.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.