I can no longer avoid making the various fiberglass ducts & whatnot for
my cooling systems.  Can anyone give me some useful citations on how to
work with fiberglass?  I don't have the first clue where to begin, so a
beginners book with enough meat to get me through the (hopefully simple)
task of building a few KN ducts would be great.

On a side note -- I need to make a custom oil pan.  Couldn't I make it
out of fiberglass too?  The oil isn't all that hot, and it's not a
pressurized system...  Just trying to kill 2 birds with one stone...

Mark Supinski

There are some books on the subject sold by Aircraft Spruce.
I'll check over my collection when I get home to day and
see if I like one better than another.
Go to any boat or yacht shop. They have most of the supplies.
Get youself a cheap kit and jump in.

Paul Lamar ...No rotor no motor.

Mark,
Try to find a builder near you who is building a composite AC.  Just
building the airframe gives one the expertise to tackle almost any composite
project.  How's the Pport going.

Joe Berki
Limo EZ


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.