Does anyone have one of the special tools required to separate the
eShaft on the 20b.  I found one at Scalliwags.com but the site seems to
be down for ordering and there is no contact number.  I maight be able
to weld one up with 4130 tubing but it will take a little bit to mock it
up without the original dimensions.

If someone could lend me the tool I will pay the shipping both ways.  If
someone has a diagram of the tool, that will help as well.

Thanks,

Keith Stevens



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.