Subject: FG citations - oil pan
From: Rotary Engine
Date: 3/11/2006, 8:17 AM
To: AAme




>>
>> What about the concept of a fiberglass oil pan?
>>
>> Mark Supinski
>>
>>
>> I would not try it. Too risky. Too much to lose if it melts and leaks.

go to http://www.ez.org/feature/F0502-1/F0502-1.htm and read all about
it.. jofarr, soddy tn


-------------------------------------------------

Just because something CAN be done does not mean it SHOULD be done :)

Does it conduct heat better? No.
Does it take less labor to build? No.
Does it accommodate high oil temperature of the rotary engine? Maybe not.
Does it cost less in materials? No.
Does it weigh significantly less than an aluminum oil pan? No.

Why do it then? Just to see if it can be done? Do you have nothing
else to do installing a rotary engine in an aircraft?

Perhaps Will James was bored installing an air cooled aircraft piston  engine in his
airplane exactly like everybody else installs an air cooled aircraft piston engine
in their airplane and he needed a challenge :)

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.