This is from:
www.gepower.com/prod_serv/products/tech_docs/en/downloads/ger3567h.pdf
Since the exhaust gas temperature of the Wankel is pushing
the limits of turbine inlet temperature this GE blade cooling
technique has some merit in extracting yet more HP from
the Wankel exhaust and further lowering the BSFC. The steam can
be fed into a small BMW style "expander"
(1750's era piston steam engine :)) and used to drive engine accessories
such as the alternator and water pump.
Paul Lamar ...No rotor no motor.
Paul,
I think that the GE concept is applicable (been applied) to larger turbines
(i.e. jet engines). It would be a real manufacturing challenge to make the
internal flow passages in a turbine sized for a Mazda engine.
Bill Schertz
KIS Cruiser # 4045
Yes I agree. The solution is to insert the heat exchanger between exhaust port
and turbine to cool the exhaust gas 200 F before it enters the turbine.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.