Paul,

Looking through the archives, I've been unable to
see your
recommendation for a turbo size. I know that you've
played with trying
to get the stock 89-91 turbo to work at the thinner
air up high but
that's still a work in progress. Greg Richter got a
recommendation from
Garrett or Turbonetics (a dealer) for one of the TO4
series. Do you
remember what it was? Trim style? A/R ratio? I seem
to recall it was
greater than 1.0.

What are the Cozy Girrrls using?

Any suggestions?

Barry Gardner
Wheaton, IL

I'll have to search backwards for that. Perhaps
later today. The TO4 will
certainly work but it is a lot easier to just use
the stock 89-91 water cooled turbine
with built in waste gate and put a TO4 compressor on
it like Dave Leonard did.
This slows the stock turbine allowing it to live.
The TO4 requires custom
everything and an external waste gate. That adds a
lot of weight, cost and time.

Paul Lamar ...No rotor no motor.

Barry

I think this is what you want, eBay item 8045435682.
It looks like it has the correct flange for the 13B
exhaust manifold.

Erik


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.