Subject: Traction drive with spur gear reduction
From: Rotary Engine
Date: 3/15/2006, 9:48 AM
To: AAme





OK Doug I give up. Power off the ring it will be. I'll add one stage
of small straight cut spur gears to get it rotating in the right
direction.
Why fight the centrifugal force? The force is not with you.
I'll keep the leaf spring design.
-- 
Paul Lamar ...No rotor no motor.

Seems like a year ago we were considering these QTC gears for a high
speed planetary. Now I am looking at them again for a spur gear
reduction. The beauty of the spur gear reduction is (if I design
it right) they can become change gears. Any reduction or speed up
you want by changing two gears. The belt drive can be optimized
for HP and speed and left alone.

The 15 mm shaft seems about right. I have email in to them for max RPM
advice. I don't think it will be a problem with these precision hardened
and ground gears.

http://www.qtcgears.com/RFQ/default.asp?Page=../KHK/newgears/KHK020.html

BTW when we get the reduction right we can turn them into oil
and scavenge pumps. 3 jobs for two parts.

Paul Lamar ...No rotor no motor.


Paul,

Time is money.  By the time you end up playing around with designing this
and making it and testing it etc,.  you would be way ahead to buy the ROTREX
drive.   Ahh but let me discourage you:)

Doug Fir


Maybe true but not as much of a learning experience :)

Also this way I can design in the spur set set and make some
improvements. I can also make it fit the stock turbo engine
so if someone else wants one after we demonstrate it works
they can use my drawings.

After thinking about that for 30 seconds the Rotrex would still
not work because the nut on the shaft is threaded the wrong way :)

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.