Subject: Traction drive with spur gear reduction
From: Rotary Engine
Date: 3/15/2006, 7:12 AM
To: AAme



OK Doug I give up. Power off the ring it will be. I'll add one stage
of small straight cut spur gears to get it rotating in the right direction.
Why fight the centrifugal force? The force is not with you.
I'll keep the leaf spring design.
-- 
Paul Lamar ...No rotor no motor.

Seems like a year ago we were considering these QTC gears for a high
speed planetary. Now I am looking at them again for a spur gear
reduction. The beauty of the spur gear reduction is (if I design
it right) they can become change gears. Any reduction or speed up
you want by changing two gears. The belt drive can be optimized
for HP and speed and left alone.

The 15 mm shaft seems about right. I have email in to them for max RPM
advice. I don't think it will be a problem with these precision hardened
and ground gears.

http://www.qtcgears.com/RFQ/default.asp?Page=../KHK/newgears/KHK020.html

BTW when we get the reduction right we can turn them into oil
and scavenge pumps. 3 jobs for two parts.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.