I tried fitting my 1988 turbocharger on my 1990 engine and seemed as
though there wouldn't be enough clearance for any type of intake
manifold. The distance between the turbo and supercharger and the rotor
housing is less than 1 3/4 inches.
 How about grinding a little bit off the blade tips (more clearance) to
keep the turbine from over speeding? Karibian

That might work but it would be better to put a larger compressor on
it because same day you will be able to add a simple gear box and cut the
fuel burn 15% to 20%.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.