Subject: Engineering the turbo compound turbine reduction
From: Rotary Engine
Date: 3/17/2006, 10:39 AM
To: AAme

I just downloaded a great  pdf from Boston gear
with some engineering gear design info.
http://bostongear.com/literature/lit_available.asp?family=open

Download PDF (4.5 MB)

It occurred to me that a worm drive gear box might
just work with direct input from the turbine.
Boston Gear says it is good for high speed.
10:1 or more reduction is no problem.

Of course you will need a one way clutch on the out put as
it is nearly impossible to back drive a worm gear.

I am not starting over. I will build the traction drive
with herring bone reduction gears I have designed.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.