Thanks Jarrett.

There will be a few more.
Paul

Jarrett & Heidi Johnson wrote:

These should work.

Let me know if you need more.
Jarrett

Jarrett & Heidi Johnson wrote:

I think I can help you Paul.

Jarrett

Number 3

Paul

Send whatever you want I drive SolidWorks all day
long so doing some quick file conversions is a
breath of fresh air  :-)
I have dsl so file size doesn't matter to much to
me. I think that last one was only about 400kb so
the SW files should come back pretty small for
you.

Jarrett

OK Jarrett I am reiterating the design once again so one of the parts
I sent will need to be redone. Shifting the device from a planet carrier output
to a outer ring output has complicated it greatly. Also adding the clutch
means I now have two concentric shafts to locate. What ever it takes
I am going to do it. NASA should have done it ten years ago when they found
in theory they could get 40 to 85 HP of of the turbine. Why they did not go
ahead and build the hardware and test it is beyond me.

Thanks for your help so far. More to come.