These were a bear to draw :) First 3D jpg.
Pratt & Whitney style herring bone with oil pressure release.
Pratt & Whitney claims over 99 percent efficiency for the PSRU they
made.
These gears are 48/36 (1:33) reduction after the
9:1 traction drive giving an over all reduction of
12:1. At a turbine RPM of 85.000 the small pulley will
be turning at 7083 RPM.
The big gear has P.D of 2 inches and the small a P.D of 1.5 inches.
each gear is a half inch wide. The herring bone arrangement cancels
out the helical gear thrust. The gears can be reversed as can
the multi V belt pulleys to give a range of adjustable ratios.
The HP is anybodies guess as Boston Gear does not rate them for
3900 FPM pitch line velocity. The formula says 56 HP but they
talk about 1500 FPM max. They are the best Boston Gear makes
with hardened steel and polished teeth. Hopefully they will live
long enough to get some dyno data.
Of course they reverse the direction of rotation making this box
work with a stock Rx7 Turbo II engine turbo charger putting excess turbine
power into the nose of the e-shaft.
------------------------------------------------------
Here is what the complete box looks like with out shafts and traction drive
parts. It is a check on fit and assemble. Also no helical gears as they take
up considerable megabits. Yes There are a few holes missing hear and there.
I cannot imagine doing projects like this before 3D programs. For the guys
designing engines in the old days it must have been a major undertaking.
Second 3D jpg.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.