I could probable get a patent on this but I don't want to spend
the time and money just to be able to fight some big corporation
that might want to use it. If I publish it they cannot get a patent.
What it is is six little leaf springs (green) that apply 200 pounds each constant pressure
on the input shaft through the roller shafts (brown) and rollers. This enhances the pressure
from the undersizes outer ring and relives it from some of the flexing required that
can cause it to fatigue eventually. The leaf springs are not flexing so fatigue
is not a problem. The roller shafts slide in radial slots. The ends of the leaf springs
are deflected inward by 12 set screws, one on each end of each leaf spring.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.