Subject: Oilpan 4 drawing]
From: Rotary Engine
Date: 3/21/2006, 11:42 PM
To: AAme




Paul-

Two holes in this drawing are not dimensioned on the plan.  Are they
1.5" like the other smaller hole?  Getting this fabbed on Thursday so I
can install it on Saturday.  Also got all the fiberglass supplies & now
have a plan ... woo hoo, progress at last...

Mark Supinski

Ops don't do it . I had problems with that one let me do another.
Here it is. The top dimensions and thicknesses are exactly the same
but there is more room for a stock oil pick up tube and screen.

The two holes unmarked are not critical. Anything between 1.5 and 2 is
fine. They are oil drain back holes.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.