>
    >
    > Paul-
    >
    > Two holes in this drawing are not dimensioned on the plan.  Are they
    > 1.5" like the other smaller hole?  Getting this fabbed on
   Thursday so I
    > can install it on Saturday.  Also got all the fiberglass supplies
   & now
    > have a plan ... woo hoo, progress at last...
    >
    > Mark Supinski
    >
    > Ops don't do it . I had problems with that one let me do another.
    > Here it is. The top dimensions and thicknesses are exactly the same
    > but there is more room for a stock oil pick up tube and screen.
    >
    > The two holes unmarked are not critical. Anything between 1.5 and
   2 is
    > fine. They are oil drain back holes.
    > --

   Paul,
   Does this pan have clearances for the schertz beam under the engine?


   --
   Blake C. Lewis

   No it does not. Mark has a rare beam and a rare rear motor mount.

   Keep reading. The one you are looking for is coming.

   Paul Lamar ...No rotor no motor.



I prefer to think of it as "SBeam Classic"... ;-)

Mark Supinski




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.