Bob Young sent me an SAE paper on a highly interesting McCulloch
"Highly Compounded Engine" SAE 660173.
As far as I can tell from the paper the way it worked was an over
sized turbo charger was used to pump air into what was called
a "re-entry compressor". This was a fancy name for an air motor.
The large diameter air motor put torque into the crankshaft of a
five cylinder radial, liquid cooled, loop scavenged, direct injected,
diesel, two cycle engine. High pressure air out of the air motor was
then used to charge the cylinders. Very ingenious. Very low fuel consumption
for a loop scavenged two cycle engine at below .45 BSFC.
BTW It had slipper rod bearings which the Balser radial engine for the Langley 1898
Aerodrome used, WW I rotary radial engines as well as a recent Continental two cycle
diesel, four cylinder horizontal opposed prototype that Continental got 10 million
dollars of our tax money to develop but never went into production.
Yet another aircraft diesel engine that failed to make it.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.