>>
>> Paul I took a new look at the oil pan and radiator. My old drawings
>> using the original s-beam placement and my double wedge oil pan are
>> obsolete. Long ago I decided the double wedge oil pan was not such a
>> good idea as the pick up tube could be uncovered at any attitude
>> except level flight. I still worry about this with your wedge tank
>> since most of the oil in the pan will be below the stock pick up.
>> In this new drawing I have moved the pickup to the deepest place in
>> the pan.
>> It seems a good idea to me.
>>
>> This arrangement requires 8.5 inches between the oil pan flange and
>> the bottom of the cowl. This can be cut down by making the pan
>> shallower. Or the bottom of the cowl can be shaped to provide
>> clearance. The Tailwind, by no means roomy inside the cowl, has
>> sufficient room I think. I will measure tomorrow. Lowering the cowl
>> belly is not a problem for me. Jerry
>>
>> P.S. Very disappointed to discover my new cad program does not export
>> JPGs. I had to do a screen shot which I then opened in Preview and
>> imported into photo shop just to send a little drawing. Maybe I can
>> write a script to automate the process. This simple little 2D
>> drawing is the first real work I have tried. 3Ds coming
>> shortly... :)
>
> apparently that did not work. I just sent the file to myself and it
> came through o,k, I will try again;
>
> Don't send eml files they don't work on this end.
>
> --
> Paul Lamar ...No rotor no motor.
I have no idea what an eml file is. .eml does not appear on any of my
file types either in Graphite or Photoshop. According to my
computer I am just sending a jpg that was edited in PhotoShop. Same
thing I have done a hundred times before. I have a message posted to
AshlarVellum asking for advice. I will send a different test image
to you privately to see if it is just something about that
particular drawing. Jerry
What email program are you using Jerry? Check the settings to make sure
you are sending out plain text messages.
Does anybody know what a .eml file is?
Paul Lamar ...No rotor no motor.
P,
*.eml are saved Outlook Express e-mail message files. When you save
an e-mail message from the Outlook Express program, it creates *.eml
files. They can be opened with Outlook Express (duh), but I'm sure that
there are "viewers" available that will allow you to see them.
Jack--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.