Subject: 13B Possible belt PSRU
From: Rotary Engine
Date: 3/29/2006, 9:35 PM
To: AAme



Hi Paul & all,

Another question if you don't mind please. Does anyone know of a similar belt PSRU installation on a
13B? (I know the 13B's output is much higher than the engine's in the photo) And if so, would you
regard such an installation safe for use. Just by looking at it, it seems to be both light weight
and simple to fabricate. Plus, on an amphip, it would allow the engine to be mounted lower with the
prop still clearing the hull which would be good for overall cg.

Regards,

Hennie

I think that is a great idea. Here is a an old drawing on the idea I did
back before Rhino. You would also have higher prop efficiency and lower
overall drag due to better pylon streamlining.

Contact Ken Welter. He has hundreds of hours with a belt PSRU of his
own manufacture.

http://homepage.mac.com/rotarycoot/

BTW Ken, does your girlfriend have a rotor tattooed on her stomach? :)
-- 
Paul Lamar ...No rotor no motor.

I thought that was Ken.

Gibbons

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.