I found that 3D's are wonderful when checking a mechanical design.
You can do a virtual assembly to find mistakes and see if
it is possible to assemble things. I have found several mistakes so  far
on this turbo compound gear box. One of the mistakes was my failure  to allow
room for the lube oil to circulate.

In the old days prior to 3D computer programs
we used to make the parts and then make them over and over again
until everything went together and fit.

Doug and Ken if you guys are building PSRU gear boxes let
me know when I came back from Sun & Fun and I will see if
everything fits and goes together OK.

Paul Lamar ...No rotor no motor.

Paul, It has been quite an entertaining journey, watching from side
lines as your ability with the 3D renderings progressed.  At this
point I am truly amazed by what you can do with Rhino.  The
outpouring of drawings has made participation in the list richer and
our understanding of all aspects of converting and  installing the
rotary much clearer.    Thanks,  Jerry


Thanks Jerry. Your welcome. I am here to help.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.